Skip to the stories
Climate Science

OMCO Solar Adds Solar-Powered Controls to Its Utility Tracker System

By SPW 524 views

OMCO’s battery-backed controls run without site AC power and can move trackers into protective positions while projects await grid connections.

OMCO Solar Adds Solar-Powered Controls to Its Utility Tracker System

Solar-powered tracker controls could help utility-scale projects protect installed modules before site AC power is available. OMCO Solar now offers an all-DC version of its OMCO Star Tracker Control System, using solar-charged batteries to operate tracker controls without an AC supply or uninterruptible power supply.

Share

The system is designed for OMCO Origin Factory-Direct Trackers. Its tracker controllers, array controllers and sensor bridges draw power from all-weather battery packs charged by solar modules. OMCO says the packs are sized to provide multiple days of autonomy, while the charging system is designed to work through midwinter conditions and poor weather.

Protection before site power arrives

Large solar projects can have trackers and modules installed before AC power is available across the site. That creates a practical gap: equipment may need to be moved into a safer position even while the infrastructure that would normally power its controls is not ready. OMCO says its system lets controls operate once trackers are built and solar modules are installed, so operators can protect equipment during that period.

The controls can move modules and trackers to reduce exposure to wind, snow and hail, according to the company. That capability may matter during construction, when a project is not yet operating but equipment is already in place. The source does not specify the weather thresholds, protective positions, or operating limits, so those details will depend on system configuration and site conditions.

Removing AC power requirements from the tracker controls also removes the need for an uninterruptible power supply for those components. The practical effect is a different set of power and installation requirements for the control system. Project teams would still need to plan for the tracker equipment, solar modules, battery packs, communications and maintenance needed to keep the system working.

Wireless links and field operation

OMCO Star uses LoRa, a long-range wireless technology. OMCO reports a communication range greater than one mile and says the system can communicate directly with each tracker without depending on a mesh network. The company says this design reduces the number of network controllers required.

OMCO also says LoRa is 100 times less susceptible to electromagnetic noise than Zigbee and can connect to distant trackers more effectively when obstacles are present. Those are company claims; the system’s performance at a particular project will depend on its layout and conditions in the field. Communication range alone does not establish how well a signal will perform across every terrain, array configuration or source of interference.

For field crews, the system includes batteries that can be replaced on site and a phone app that removes the need for buttons on the controllers. Operators can also use a remote monitoring and control portal to move trackers for work such as mowing, snow plowing and module cleaning. These functions connect routine site access with tracker positioning: crews can request a position suited to a task without relying on local controller buttons.

Battery-backed controls shift attention toward battery condition and charging performance, particularly at sites with extended cold or cloudy periods. OMCO describes the packs as suitable for cold climates and the solar charging as designed for midwinter and bad weather. It has not provided details here on battery capacity, service intervals or expected performance under specific temperature and weather conditions.

Where it fits in project delivery

OMCO vice president of solar technology Matt Kesler said the product addresses the need to protect modules when a site lacks AC power, including for a short period. Eric Goodwin, the company’s vice president of business development, said OMCO is bringing the system to utility-scale and distributed-generation tracker markets and expects it to reduce labor and materials needed to build projects. The scale of any savings will depend on project design and installation practice; no cost figures are provided.

The company says it develops, manufactures and supports the system in the United States. It will display the all-DC controls at RE+ in Las Vegas, November 17–19, in the North Hall at booth N516. For project teams assessing the system, the central questions are how its battery autonomy and charging perform at the specific site, what communications coverage the array requires, and how the controls integrate with construction and maintenance plans.

From the same basket